Acknowledging the rapid growth in Home Theatre development over
recent years, ProAc are proud to introduce their first centre-channel
loudspeaker, the Response CC ONE.
More than a year in development, the CC ONE provides the perfect complement
for all home theatre applications, especially where ProAc monitors
are used for front, back or side installations.
For the first time, sophisticated ProAc quality can be experienced
throughout the complete system.
The drive units in the CC ONE have been designed with specially shielded
magnet systems to eliminate distortion or interference on Television
and computer screens.
For the home theatre application particular emphasis has been placed
on producing a rich, smooth and flat response with a very natural
midband.
This has been achieved using two five-inch drivers with carbon-filled
polypropylene cones and phase plugs, which are loaded by an equalized
reflex port in the rear.
The bass drivers cross seamlessly to a superb soft dome tweeter which
adds natural harmonics to the programme. This treble unit is manufactured
specially for ProAc and is used in several of our flagship Response
range models.
The cabinet itself is extremely well damped with bitumen and lined
with anechoic grade foam to eliminate resonances.
The CC ONE is an easy and efficient loudspeaker to drive and works
equally well in the reproduction of music, speech and sound effects.
Although this new model will be compatible with any home theatre
system, we strongly recommend the use of ProAc monitors for the
complete system.
Particularly suitable would be the Tablette Reference Eight or Tablette
Reference Eight Signature for rear and side speakers.
A more expansive (and expensive!) system would comprise the Response
1SC for rear and sides with perhaps the Response D15 or Response
D25 for front left and right speakers.
The Studio 125 would also make an excellent choice for a quality,
cost effective front speaker solution. Combined with the centre
channel CC ONE, any of these combinations would deliver outstanding
reproduction.
Nominal Impedance
8 ohms
Frequency Response
38Hz to 30Khz
Sensitivity
89db for 1 watt at 1 metre
Bass/Midrange Driver (2)
5" magnetically shielded carbon-filled polypropylene units
with phase plug. Bass loading through equalised rear reflex port.
Tweeter
3/4" magnetically shielded soft fabric dome manufactured to
ProAc specification.
Dimensions
17 1/2" (445mm) long
7" (178mm) wide
7 5/8" (192mm) deep
Weight
22 lbs (9.6kg)
Grille
Acoustically transparent crimplene
Finish
Black ash, Mahogany, Maple and Cherry.
* Due ProAc's policy of continuous improvement specifications are
subject to change without notice.
|
